How to test a house for meth
Short answer
Start with records: the DEA's National Clandestine Laboratory Register lists addresses where labs or dumpsites were reported, and some states keep their own lists.1 Then test. Surface wipe samples analyzed by a laboratory, collected by a qualified or certified tester where your state requires one, are what state programs rely on; Utah's health department recommends working with a certified decontamination specialist for testing rather than endorsing kits.4 Compare results with your state's standard, which differs widely between states.
Step 1: check the lists
- DEA National Clandestine Laboratory Register: addresses of some locations where law enforcement reported finding chemicals or other items tied to clandestine drug labs or dumpsites. The Justice Department says it has not verified the entries, that the list is not complete, and that it does not certify cleanup; it points the public to state and local health or environmental agencies for that.1
- State registries: some states list contaminated or quarantined properties. Tennessee keeps a public list of quarantined properties, and Colorado has kept a public meth-property database since January 2024.23 See the "Property list" column on Meth disclosure by state.
A clean record does not prove a home is clean; the DEA describes its list as covering only some locations, and lists track reported labs, not use.
Step 2: choose how to test
| Option | What it tells you | Notes |
|---|---|---|
| Home test kit | Whether meth is detected above the kit's threshold | Useful for screening; check that the threshold is at or below your state's standard |
| Lab-analyzed wipe samples | A measured amount per surface area | What state programs use; some states require a certified tester |
| Certified assessment (where required) | Formal results usable for state clearance | Needed if the property is posted, quarantined or on a state list |
Utah's health department does not recommend specific kits, to avoid endorsing a business, and recommends a certified decontamination specialist for testing.4 Alaska's agency explains its own sampling rules and approved screening methods for posted properties.5
Step 3: read results against your state
Standards are written as micrograms of meth per 100 square centimeters of surface. In our data they range widely:
- 0.05 (Arkansas)6
- 0.1 (Alaska, Idaho, Kentucky, Tennessee)
- 0.5 (Colorado, general areas; Indiana)
- 1.0 (Utah)7
- 1.5 (California, Washington)
Full table: Meth cleanup rules by state. Utah explains that its 1.0 level was set after risk modeling, while other states use 0.1.4 If your state has no standard, the EPA's voluntary guidelines describe common approaches but do not set a federal requirement.8
After results
- Below your state's standard: in Utah, results below 1.0 require nothing further.4 Keep the report.
- Above it: check whether your state requires a certified contractor and post-cleanup verification. See Cleaning up meth yourself.
- Renting: see Tenant rights after contamination.
Sources
- U.S. Drug Enforcement Administration. National Clandestine Laboratory Register.
- Tennessee. Meth Registry | TDEC. Checked 2026-11-22.
- Colorado (statute). SB 23-148 (Session Laws 2023, ch. 326). Checked 2026-11-22.
- Utah Department of Health and Human Services. Methamphetamine Frequently Asked Questions.
- Alaska Department of Environmental Conservation. Illegal Drug Lab Decontamination and Certification FAQs.
- Arkansas. Arkansas Clandestine Laboratory Remediation Standards (May 2008). Checked 2026-11-21.
- Utah. Methamphetamine FAQs (Utah). Checked 2026-11-22.
- U.S. EPA. Voluntary Guidelines for Methamphetamine and Fentanyl Laboratory Cleanup. Document August 2021 (EPA-540-B-21-002); page updated June 16, 2026.